2023-10-27
- Fixed bug in autoconfigure script for MSM4 messags.

2022-11-21
- Added support for GNGGA and GNRMC sentences in the 'Position Status' tab.

2022-03-22
- Added display of RTK Sats

2021-01-17
- Added support for OEM7 model numbers
- Added support for DUALANTENNAALIGN command
- Added support for setting base station ID

2019-10-31
- Added support for parsing messages from XCOM ports

2019-04-23
- Added support for OEM 7 receivers that need SERIALCONFIG to set com port baud rates.

2019-01-02
- Added options for 230,400 and 460,800 bps baud rates.

2016-03-22
- Updated logs requested when doing a diagnostic log dump.

2015-03-30
- Fixed bug in POSAVE command, used for starting base station self-surveys.

2014-09-04
- Minor change to TerraStar status page to refresh some info at 1 Hz.

2014-08-22
- Fixed bug with opening the correct serial port when more than one port exists.

2014-08-20
- Added support for TerraStar-D status and configuration
- Added support for SteadyLine configuration
- Added refresh button for receiver status
- Added position averaging status to base station wizard self survey
- Reorganized menus for Receiver Settings

2014-02-07
-Improved serial port enumeration for computers with inactive Bluetooth Serial Ports

2013-08-30
-Added port stats display for each COM port
-Added buttons to turn off GGA and RMC sentences from the position status tab.

2013-06-06
-OPUS data capture will now run continually until stopped, 24 hours per file.

2013-06-04
-Minor configuration change to put reciever into rover mode for OPUS survey wizard.

2013-05-05
-Added base station configuration wizard.
-Added descriptive info to help identify the computer's serial ports.

2013-02-08
-Added network connection support and Ethernet config options for OEM628 receivers.

2013-01-15
-Added support for OEM6 receivers.

2012-12-20
-Added a simulation option so you can see the interface without being connected to a receiver.
-Added support for viewing and changing the installed software models.

2012-12-01
-Added support for setting Undulation.

2012-07-17
-Updated NTRIPSTATUSA log parsing to support more information.

2011-12-20
-Changed diagnostic logging to ASCII data only.

2011-12-16
-Fixed a bug in the diagnostic logging capability.

2011-12-05
-Removed low precision GGA option.
-Added diagnostic logging capability for tech support.

2011-07-22
-Clarified the difference between precision for GPGGA and GPGGALONG log types.
-Application now remembers the last serial port used, baud rate, and NTRIP settings.

2011-07-04
-Simplified enabling of GL1DE filter.
-Added ability to set GGA quality indicator.

2011-06-13
-Fixed bug in position status; fix type not reporting correctly.

2011-06-12
-Added connection warning when receiver doesn't respond.
-Changed the way ports are listed.
-Changed the way position status is reported when the data is invalid.
-Fixed minor bug with event log not auto-scrolling to the last line.

2011-06-01
-Fixed bug when connecting via the AUX port.

2011-04-26
-Added auto-configure port scripts for ALIGN connections.

2011-04-13
-Fixed bug with event log being partially hidden.

2011-04-10
-Added buttons to turn on GPGGA and GPRMC messages on status tab.
-Added cellular configuration options.

2011-03-22
-Added echo and break detection options to port configuration.

2011-02-28
-Added OEMV3 model detection and image.

2011-02-23
-Added warning about resetting the serial port back to defaults.

2011-02-22
-Fixed default serial port selection when no COM1 port is present.
-Added solution and signal type display to the main receiver settings screen.
-Only shows status info when valid GGA and RMC messages are coming in.

2011-01-06
-Changed "Reset Serial Port" checkbox to not be checked by default.

2010-12-09
-Original Release