Lefebure.com / Documentation / Satel 450 MHz radio settings


To configure a 450 MHz Satel EASy radio to be compatible with the Ag Leader radios, you need to verify the following settings:
Channel Spacing: 12.5 KHz
Error Correction: ON
Error Checking: OFF

Note: The baud rate setting only applies to the baud rate on the RS-232 serial port on the radio. This baud rate has to match the device it is connected to on that serial cable. It does *NOT* have to be the same as the radio on the other end of the wireless link. Typically I configure the radio for a baud rate of either 9600 or 38,400 bps.



Last updated: November 22, 2022